판매용 중고 SHIMADZU 2010 GC #165768

System with Single Split/Splitless Injector Single Split/Splitless Injector Single Flame Ionization Detector (FID) Fast Oven Cooling Option Automatic Pressure Control (APC) 110V/60Hz User Manual Available Options: AOC 20i Autosampler with 150-Sample Tray Single Wide Bore Single Split/Splitless Injector Clarity-Lite Data Acquisition Software Shimadzu 2010 GC Starter Kit Column Oven Temperature Range (Ambient + 4°C) ~ 450°C (using LCO2 gas: -50°C – 450°C) Inner Dimensions and Volume 280 (W) x 280 (H) x 175 (D) mm, 13.7L Temperature accuracy ±1% of the set temperature in Kelvin unit (calibration at 0.01°C increments) Temperature Variation Coefficient 0.01°C/°C Temperature Program Steps Up to 20 (cooling program possible) Programmed rate setting range -250°C ~ 250°C/min Total time for all steps 9999.99 minutes max. Injection Ports Temperature Range Up to 400°C Heating Settings 1°C steps No. of units installed simultaneously Up to 3 units Sample injection unit types Split/splitless injection is standard Direct (without split) injection unit (option) On-column/PTV (programmable temperature vaporizer)injection unit (option) Flow Control Unit Advanced Flow Controller (AFC) Split/splitles injection mode and direct injection mode Pressure range: 0-970kPa Programmable Steps 7 (Negative pressure step is available) Programmed Rate Setting Range -400 ~ 400kPa/min Split Ratio Range 0 – 9999.9 Mass Flow Rate Setting Range 0 – 1200mL/min Constant Linear Velocity Maintains optimum separation at all times Available Optional Accessories AOC-20i Auto Injector Direct injection, PTV/LVI, 1 – 250 uL syringes, ambient headspace AOC-20s Auto Sampler 150 1.5mL vials or 96 4mL vials and barcode reader Leap Combi-Pal Autosampler SPME, headspace and micro-titer plate sampling capability PY2020D Pyrolyzer Single or double shot includes autosampler Detector Type(s) FID, TCD, ECD, FPD, FTD Flame Ionization Detector (FID) Temperature Range 450°C max. Minimum detected quantity 3pgC/s (Dodecane) Dynamic Range 107 Thermal Conductivity Detector (TCD) Temperature Range 400°C max. Dynamic Range 105 Sensitivity 20,000 mV – mL/mg (Decane) Electron Capture Detector (ECD) Temperature Range 350°C max. Minimum detected quantity 8fg/s Dynamic Range 104 Flame Photometric Detector (FPD) Temperature Range 350°C max. Dynamic Range P: 104 S: 103 Minimum detected quantity P: 0.2pgP/s (tributyl phosphate) S: 4pgS/s (dodecane thiol) Temperature Range 450°C max. Dynamic Range N: 104 P: 104 Minimum detected quantity N: 0.2pgN/s (azobenzene) P: 0.03pgP/s (malathion) Maximum of 2 detectors to keep instrument performance.