판매용 중고 BACCINI / AMAT / APPLIED MATERIALS Softline 2.0 #9187077

Dual screen printer Wafers semi square (Mono crystalline): 125 x 125 mm Wafers poly Si square (Multi crystalline): 125 x 125 mm Wafers semi square (Mono crystalline): 156 x 156 mm (95 mm Diameter) Wafers poly Si square (Multi crystalline): 156 x 156 mm BACCINI Line loader for stack magazines (5) Empty magazines (5) Full magazines Cells each magazine: 200-300 (Depending on thickness) Transport belt: Powered by servo motors are controlled by encoders Soft rotary printer (Front print): Fully automated high-speed solar cell printer With rotary table and soft handling concept Print head: Screen frame: Type 10, 355 x 355 mm Maximal printing area: 170 x 170 mm Maximal squeegee stroke: 240 mm Maximal squeegee speed: 333 mm/s Maximal squeegee pressure: 150 N Camera aligning system: Alignment tolerance: < ± 20 µm Flat belt dryer: IR-Lamp heating system in combination With blowing hot air Technical data: (3) IR Heating zones Air heating zone Exhaust Maximum temperature: 250°C Maximum temperature tolerance: +/- 5°C Drying time (min./ max.): 20 s to 40 s Lifting device with (2) fixed cassette magazine sidewalls Equipped with motorized width Adjustment to adapt to different wafer sizes Working principle: FILO Transport belt section Cell presence control Furnace loader: Electro welded steel Sick light barriers for easy access by operator Firing furnace: With dryer section Firing furnace unloader: With double stack buffer Stack magazines: 2 or 4 (2 + 2) Wafers per magazine: 300 (Depends on wafer thickness) Squeegees screen frame adapter Industrial-PC with keyboard TFT Screen Graphical User Interface (GUI) Wafer bow: Room temperature: Before firing: < 1 mm (Center to edge) After firing: < 4 mm (Center to edge) Up time: >95 % Mechanical yield: 99.5 % Minimum thickness of the wafers: 140 µm Missing parts: ELMO Card ELMO Card 115MG Printer Z-axis motor 2008 vintage.