판매용 중고 HELLER 1913 MK III #9165227

Reflow ovens Inert atmosphere: Minimum PPM Oxygen: 10-25 PPM Nitrogen cooling: Yes Waterless cooling with flux separation system: No Nitrogen On / Off valve: No Oxygen monitoring system: No Nitrogen standby system: No Sample port in reflow: Yes Typical nitrogen consumption: 500 - 700 SCFH Computer control: AMD or Intel based computer: Yes Recipe storage: >500 Flat screen monitor: Yes OS: Windows XP Monitor mount: Yes Auto start software: Yes Data logging: Yes Password protection: Yes LAN Networking: No Mesh belt conveyor: Height from floor: 35.5" + 2.0" (90 cm + 5 cm) Maximum PCB width: 10" (25 cm) 15" (38 cm) 18" (46cm) 20" (50.8 cm) 24" (61 cm) (Requires 30” heater modules) Conveyor length On / Off load: 6" (15 cm) Heated tunnel length: 140" (355.6 cm) Process clearance above mesh belt: 2.3" (5.8 cm) Mesh belt pitch: 0.5" (1.27 cm) Maximum conveyor speed: 74"/Min (188 cm/min.) Conveyor direction left to right: Yes Conveyor direction right to left: No Conveyor speed control type: Closed loop Edge hold conveyor system option: Height from floor: 37.0" + 2.0" (94 cm + 5 cm) Clearance conveyor pins: 1.15" (2.9 cm) (top and bottom) Length of PCB support pins: 187" (4.75 mm) 3 mm Long support pins: No Minimum / Maximum board width: 2.0" - 18" (5 – 45.7 cm) 22” (55.8 cm) (Requires 30” heater modules) Power width adjustment: Yes Computer controlled width adjust: No Auto lubrication system: Yes Forced convection zones: (13) Zones (top and bottom) Heater type: Instant response open coil Heater material: Nichrome Profile change time: 5 - 15 minutes Temperature control: Accuracy of temperature controller: ±.1°C Cross-belt temperature tolerance: ±3.0°C Heater wattage per zone: 6000 W Temperature range standard: 25-350°C High temperature up to 400°C: No High temperature up to 450°C: No Insulation type: Calcium silicate UV Cure: No Cooling systems: (4) Standard cooling zones Additional cooling zone (External): No Water cooling: No Waterless cooling: No 2013 vintage.