판매용 중고 ASM IDEALmold 170T #9142313

Molding system Type: Electro mechanical servo type With 4-pin toggle mechanism Ideal 2G with single press system Equipped with vacuum mold Leadframe has been removed Mold clamping force: 170 Metric tons (Upgraded from 120 Metric tons) Force misalignment of columns: < ± 5 % of Mean value Clamping force repeat ability: < ± 1 % F.S Clamping force absolute accuracy: ± 1 Metric tons (Test report) Soft clamp capability: 155 x 50 x 0.1 mm Lower platen full stroke: 176 mm (Including 6mm ejection) Daylight: 646 mm Minimum mold closing / Lock time: 1.4 sec for 5-165 stroke Minimum mold opening time: 1.4 sec for 5-165 stroke Low speed closing: 1 mm/sec Low speed opening: 1 mm/sec Position repeatability: ± 0.1 mm Parallelism of mold platen: < ± 0.05 mm Straightness of mold platen: < ± 0.03 mm Deformation of mold platens: < 0.0254 mm / 305 mm span Feedback method: Incremental encoder on motor axis Transfer: Type: Electro mechanical low RAM movement Transfer force accuracy: ± 50 kg Transfer force repeat ability: < ± 1 % F.S Transfer operating stroke: 85 mm Position repeatability: ± 0.05 mm Operating speed: 0 ∼ 15 mm/sec with 10 step control Speed accuracy: ± 0.25 mm/sec Position sensor for feedback control: Incremental encoder Force detector for feedback control: Load cell sensing device Ejector: Type: Mechanical four points Ejector operating stroke: 3.25 ± 0.05 mm Protruding height difference: < ± 0.05 mm Maximum ejector stroke for mold protection: 3.8 mm Control: Control box: EMC Type Power supply main: AC200/220 V ± 10 %, 3 Phase, 50/60Hz Control: AC200/220 V ± 10 %, 1 Phase, 50/60Hz Interface: Molding data / Monitor data: RS-422C Input signal: Direct input (ASM to SHI) DC24V, (24) ports Output signal: Direct output (SHI to ASM) DC24V, (16) ports Miscellaneous: Acoustics noise level: < 80 dBA Lifetime: > 2 x 10^6 Cycles 2011 vintage.