판매용 중고 MAZAK Integrex 200-IVST #9316430

CNC Turning / Milling center Maximum swing: 26" Maximum swing over carriage: 19.5" -26" Maximum swing over lower turret, 10.6" Maximum distance between chuck jaws: 60"-60.83" Maximum cutting diameter: Upper chucking: 26" Lower chucking: 10.24" Main spindle (L): Spindle nose: A2-6 Spindle bore: 2.99" Maximum bar work: 2" Spindle speed: 35 - 5000 RPM Spindle index (Programmable): 0.0001° Spindle horsepower (Controller/30 Mins.): 20/30 H.P. (A.C.) Spindle torque (25% ED): 344.2 ft-lbs Second spindle (R): Spindle nose: A2-6 Spindle bore: 2.99" Maximum bar work: 2"x 34.6" Deep from chuck face (2" thru optional) Spindle speed: 35 - 5000 RPM Spindle index (Programmable): 0.0001° C-Axis Spindle horsepower (Controller/30 Min): 20/25 HP (A.C.) Spindle torque (30 min.): 241 ft/lbs Upper turret and tooling: Type of turret: 1 Position with ATC Tool size (Boring bar maximum diameter): 1.5" Magazine capacity: 40 Tools Tool selection method: Random Tool to tool ATC time: 1.3 Sec Maximum tool diameter with all pockets full: 3.54" Maximum tool diameter with adjacent pockets empty: 4.92" ATC Tool shank: KM63 Rotary tool spindle speed: 12,000 RPM Rotary tool spindle horsepower (20% ED). 25 H.P. (A.C.) Rotary tool torque (20% ED): 88.2 ft-lbs Maximum face mill: 4" Maximum end mill: 1.25" Maximum drill: 1.18" Maximum tap: 1-8 UNC Lower turret and tooling: Type of turret: Drum Boring bar maximum diameter: 1.25" (9) Tools (6 Rotary) Tool selection method: Bi-directional Tool index time: 0.14 Sec Lower turret with milling option rotary tool spindle Speed: 6,000 RPM Rotary tool spindle horsepower: (10% ED), 5 H.P. (A.C.) Rotary tool torque for 6,000 RPM: 11 Ft/Lbs Maximum drill: 4,500/6,000 RPM, 14/12 mm Maximum tap: 4,500/6,000 RPM, M12/M10 Axis travels: B-Axis: 225° Y-Axis: ±3.15" X-Axis: 22.83" Z-Axis: 60"-60.82" X2 Axis lower-5.91" Z2 Axis lower: 60"-58.66" Second headstock W-axis: 60"-61.02" Axis rapid rates: Y-Axis: 1024 IPM X-Axis: 1496 IPM Z-Axis: 1496 IPM Second headstock W-axis: 1181 IPM C-Axis: 555 RPM Total power required (Machine only): 76.5 kVA Air requirements: 71 PSI / 24.7 CFM Equipped with: MAZATROL Matrix control Color LCD, 15" EIA/ISO Code input function 3-D Coordinate conversion GOO Slope constant Shape compensation for rotary axes Cylindrical and polar coordinate Milling-spindle synchronous tapping IC Memory card interface Inch/Metric conversion Cardbus I/F (2-Slot) LAN Port USB I/F X, Y, Z Pitch error compensation input Y-Axis control KM Type upper turret Lower turret with milling Coolant thru milling head 213 PSI Thru / Clood coolant upper turret / 71 PSI Lower C-Axis 0.0001° Incr. (1St spindle) 2nd Spindle C-axis 0.0001° Incr Chuck air blast (2nd Spindle) 40 KM Tool magazine Rotary tool spindle speed: 12,000 RPM B-Axis 0.0001° / Cntring (Req. EIA/ISO) B-Axis index 5°(Coupling clamp) Lower 9 positions drum turret Chip conveyor side disposal (Hinge type), 60” 1500U Automatic tool eye Auto chuck jaws open / Close (1 and 2 Spindle) Chuck open / Close confirm (1 and 2 Spindle) Relocation device Operating system: Windows XP for MAZAK machine control Overload detection system Auto pecking with load detection (Up-turret) C1C2 Synchronous function GL150F / Pitch-feed type 2 / D3-hand / Jaw-AB Maximum workpiece: 0.79"-7.87" diameter x 4.72" L Lower turret milling function: 6000 RPM (6) Pallet pitch feed conveyors type 2 Robot interface Auto GL door open / Close (air cylinder) Safety fence (2) SMW Autoblok, 8" chucks ~ (50) KM63 Holders included 2010 vintage.