판매용 중고 ESI 44 #9237104

Laser trimming systems Type: Plug-in DVOM Scanner Switch modules Test interface Interfacing option: IEEE 488 (General purpose interface bus) Modules: Wire wrap module (Custom interface) Contact closure module (Switching interface) Resistance ratio bridge: High-speed resistance: 530 Mohms Compensation of voltage offsets and thermal e.m.f.'s Capability: Track and trim Environment temperature: 15°C to 25°C Relative humidity: 10% to 80% Altitude: 6000 feet Facility requirements: Electrical power: 110-130 VAC, 30 A, 50/60 Hz Air (parts handler): 550 kPa (80 ls / in 2) filtered Vacuum exhaust: 2830 Litres / min (100 scfm) minimum at 10 kPa (40 in w.g) Tap water (For laser cooling): 9.5 litres/min Minimum at 200 kPa (Minimum at 30 lb / in 2) Maximum: 27°C Free air vacuum: Substrate hold down Flow required: 4.2 ft³/min 20 Hg: 1.4 ft 3 minimum Vacuum hose receptacle: (18) NPT Type fittings, 3/8" Exhaust vacuum: Maximum flow: 4.5 in Wg: 200 ft 3 / min 2.0 in Wg: 490 ft 3 / min System hood: Diameter, 3" Laser cooling water: Cooling water pressure: 40 to 80 psi with 60 psi Minimum flow rate: 3 gal/min Temperature: Maximum: 27°C Minimum: 4°C Heat dissipation: 10240 BTU/hr Drain hose: National hose fittings, 3/4" Air conditioning: 15,000 to 20,000 BTU/hr Laser electrical power: Input power: 208 VAC, ±10%, 49 / 61 Hz, 3 Phases, 15 A per leg System electrical power: Input power: 208 VAC, ±10%, 30 A, 50/60 Hz, Single Phase.