판매용 중고 HORIBA MEXA-6000FT-E #9161948

Motor exhaust gas analyzer Euro Ⅵ compliance type: MEXA-6000FT-E Measurement objective: Exhaust gas from engines (un- diluted) Principle: Fourier transform infrared spectroscopy (FTIR) Outputs / Inputs: Monitor: 15-inch LCD Analog output: 0-10 V, 8/16 Channels Digital input-output: LAN Communication by AK protocol Sample line temperature: MEXA-6000FT: 113 ± 6 ºC　　 MEXA-6000FT-E: 191 ± 10 ºC Sample gas flow rate: MEXA-6000FT: 4.0 ± 0.5 L/min MEXA-6000FT-E: 17 ± 1 L/min Operating environment: Ambient temperature: 15 ºC to 35 ºC　 Ambient humidity: Less than 80 % relative humidity System configuration: Power requirements: MEXA-6000FT: Maximum: 1.7 kVA Stable state: 1.4 kVA (with 6 m heated sampling tube) MEXA-6000FT-E: Maximum: 1.9 kVA Stable state: 1.6 kVA (with 6 m heated sampling tube and bypass pump unit) Performance: Zero noise: 0.5-2.0 % Response time (T90): MEXA-6000FT: 5 Seconds or less MEXA-6000FT-E: 5 Seconds or less Repeatability: Within ±1.0 % of full scale Zero drift / Span drift: Within ±1.0 % of full scale / hour Warm-up time: Less than 2 hours: After turning on the main power Less than 30 minutes: After power-on of the heated parts in sampling unit Options: Sample line selector: (4) Lines Heated pre-filter: MEXA-6000FT: 113 ± 6 ºC MEXA-6000FT-E: 191 ± 10ºC Remote controller: Stand-by / Measure / Purge / Cal / Reset button Analog output board: Includes a connection cable (5 m) Host communication cable: LAN Cable NH3 Filter element: 88RH (φ 19.6 mm × L 90 mm) THC Measurement: Measurement range: 0-10 ppmC to 0-200000 ppmC Applications: Emission testing for various engines Evaluation of NOx after-treatment system for Diesel-fueled engines Measuring components and ranges: Components Ranges Standard CNG CO 0-200 ppm 0-200 ppm 0-1000 ppm 0-1000 ppm 0-5000 ppm 0-5000 ppm 0-2 vol% 0-2 vol% 0-10 vol% 0-10 vol% CO2 0-1 vol% 0-1 vol% 0-5 vol% 0-5 vol% 0-20 vol% 0-20 vol% NO 0-200 ppm 0-200 ppm 0-1000 ppm 0-1000 ppm 0-5000 ppm 0-5000 ppm NO2 0-200 ppm 0-200 ppm N2O 0-200 ppm 0-200 ppm H2O 0-24 vol% 0-24 vol% NH3 0-200 ppm*2 _*2 0-1000 ppm 0-1000 ppm S02 0-200 ppm 0-200 ppm HCHO*3 0-500 ppm 0-200 ppm HCOOH 0-100 ppm 0-100 ppm CH4 0-500 ppm 0-500 ppm - 0-2000 ppm - 0-1 vol% C2H4 0-500 ppm 0-200 ppm C2H6 0-200 ppm 0-500 ppm C3H6 0-200 ppm - C3H8 - 0-200 ppm 1,3-C4H6 0-200 ppm - iso-C^He 0-200 ppm - n-CUHio - 0-100 ppm iso-C4H8 - 0-100 ppm C6H6 0-500 ppm - C7H8 0-500 ppm - (NO+NO2) Sum of NO and NO2 Sum of NO and NOs Includes: 15"LCD: Rackmount type Accessories: (1) Host l/F (AK LAN) (1) Terminal box basic unit (1) Analog output board, 8ch (2) Heated filter units, HF-11 (2) Signal / Power cables for heated filter, 10 m (1) Exhaust tube (inner dia 15mm), 10 m (1) Teflon tube, 30 m (1) Nylon tube, 10 m (1) Main unit power cable, 10 m (1) LAN Cable (Host l/F), 10 m (1) Recorder cable (Analog output), 10 m (2) Heated hoses, 6 m (1) Power : AC 220v 60Hz 1 phase (Hot, neutral, earth) (1) LN2 storage Consumable parts: Includes: (30) Filter elements No.86R 19.6 mm dia. * L 90 mm (10) Filter elements No.88RH 19.6 mm dia. * L 90 mm (2) Filter elements SUS 5 µm Replacement parts: Includes: (2) Fans, SHS side panels D09T-24TH (1) Time-lag fuse (1) Time-lag fuse (4) Vibration insulators, KLB-3530 (4) Solenoid valves for SHS, MV-9A (1) Air valve, VZ120-5G-M5-F (5) Solenoid valves for SHS, MV-11-1 (1) Solenoid valve for SHS, MV-12-CA (11) Plunger sheets (11) Packings (11) O-Rings (P9) (1) Air filter (1) Regulator, R-2 UA13-G202-SV (1) O-Ring, W forolenoid valve ADV-2-5 (1) Capillary, SA-402 (1) Air combination (1) Regulator, AW20-02GB-1 (1) Air valve, PHS-40P (2) O-Rings, for air valve P5 (FKM) (1) N2 Generator CE Marked 2013 vintage.