판매용 중고 HODGE 2116 #179900

Autoclave 60” ID x 12ft Long Autoclave Vessel 48” ID x 8ft Long Work Area Maximum Design Pressure: 100 PSIG Pressure Rate: 0-10 PSI/Minute Average Depressurization Rate: 0-10 PSI/ Min. Average based on load Pressure Control Accuracy: +/- 1 PSI Pressure components: Inlet and Exhaust Valve Pressure Transducer Monitoring and Data Acquisition Temperature: Maximum Design Temperature: 500°F Heating Rate: 0-10°F/Min based on air temperature and autoclave load Cooling Rate: 10°F/Min based on average air temperature and autoclave load from maximum working temperature to 150°F Customer must have cool water Temperature Control Accuracy and Uniformity: +/- 5° Door accessories: Door Safety Limit Switch Door Seal Hydraulically Operated Insulation Liner and 3” of Insulation Insulation: The interior of the autoclave will be insulated with 3” of high temp insulation The insulation will then be covered by aluminized sheet metal All exposed surfaces will be painted with industrial enamel The autoclave will meet OSHA hot surface guidelines Exterior: Painted with heat and corrosion resistant primer and paint Temperature Monitoring Devices: (12) Thermocouples included Cooling System: Modular cooling coil located in front of electric coil Cooling water supplied by others Requires cooling water equivalent to a 21 ton cooling tower to achieve 6 Deg. F. per minute cool down Cooling tower available Vacuum System: Vacuum manifold included Vacuum Pump included (5) Vacuum lines included Chamber Pressure: Chamber Pressure controls for air or nitrogen with data collection included. Compressed nitrogen provided by others Controls: Windows based Industrial PC Programmable Control System using Phoenix Logic Ethernet for autoclave with the following features: (with no manual overrides) Control heating ambient – 450 Deg. F. at 0-10 Deg/Min F. Loaded based on 1,000 lb. of steel tooling and 1,000 lb composite product load. Run at precise temperature ambient – 450 Deg. F. for programmed time period Total automatic control of cycle sequences from beginning to end Operator controls for locking door. 1.5 PSI Door Interlock Process complete and ready to open door indicator lights Temperature and Pressure safety back ups Full program editing and storage capabilities Remote monitoring of the system is available by Ethernet Connection Thermocouples quoted separately Vacuum Lines quoted separately Tracks: Track support and angle iron tracks provided. The tracks will be able to handle the customer supplied cart Cart is available at an additional cost Valves: Safety relief One Pressure transducer for controlling pressure Pressure switch for high pressure alarm Safety: Man in cave safety switch Optional: Vacuum Line with: Two motorized ball valves Transducer with data collection Manual ball valve Pressure gauge Three way ball valve for transducer calibration Optional: Thermocouple jacks with data acquisition 2 HP vacuum pump 25 Ton cooling tower with controls, pump storage and storage tank.