판매용 중고 MEYER BURGER DS 271 #9183541

Diamond wire saws Specifications: Brick loading length (max): 40.16" Work piece dimension (max): 8.66" x 8.66" Work piece holders: 4 x 10.04" 3 x 13.39" 2 x 20.08" 1 x 40.16" Wire diameter: 0.0039" - 0.0063" Wire speed: 49 FPM Cutting media: Diamond wire (glycol or water based) Wire guide rolls diameter: 13.78" Workpiece dimensions: Cross-section: Max.210 × 210 mm (Ø 220 mm) Number of workpieces: 2 × 510 mm / 4 × 255 mm Max.loading length: 1020 mm Min.wafer thickness: 0.100 mm Wire: Diameter: 0.100 – 0.160 mm Length: up to 640 km for wire Ø 0.160 mm up to 800 km for wire Ø 0.140 mm up to 1100 km for wire Ø 0.120 mm Speed: Up to 15 m/s Direction: Forward or reverse cutting Bi-directional cycle: Programmable (in forward and backward meters) Acceleration: Up to 2 m/s2 Pre-tension: Up to 35 N (depending on wire diameter) Wire guide rollers / Wire web: Diameter: 350 mm Length: 1061 mm Weight: 175 kg Number: 2 Required power: 2 × 75 kW Bearing application: Special roller bearings, water-cooled Horizontal distance between axes: 660 mm Wire web working height: 1515 mm Wire web width: 1030 mm Wire deflection rollers: Number: (3) On each side (2 narrow, 1 wide) Diameter: 160 mm Wire winder: Reel axis working height: 1160 mm MC Reels: MB 500 Supplier reels: TA 100 and TA 180 Cutting feed: Speed: 0.01 – 10 mm/min, programmable Rapid traverse: 200 mm/min Working stroke: Max. 270 mm Slurry supply: Tank capacity: Maximum 475 l Slurry temperature: Preselectable: 20 – 27 °C Constant: +/- 1 °C Pump delivery rate: Max. 12,000 kg/h Measured and displayed with mass flow meter Slurry density: Displayed Slurry viscosity: Displayed Slurry cooling: Heat exchanger Cooling water inlet temperature: 12 – 17 °C Slurry density (25 °C): 1.62kg/dm3 PEG: 300/F600 Control system: Type: Siemens industrial: PC with integrated S7 control system 416 slot CPU; 317 FCPU Monitor / Pperating panel: 10.4“ flat panel touch-screen Coloring: Machine frame: RAL 9007 Covers: Stainless steel Accentuation: RAL 5013 Control cabinet: RAL 7035 Noise level: Noise level (free field): < 75 dB (A) Compressed air: Maximum particle diameter (class 4): 15 µm Maximum particle density (class 4): 8 mg/m3 Maximum residual oil content (class 4): 5 mg/m3 Maximum residual water content (class 4): 6 g/m3 Pressure dew point: +3 °C Minimum input pressure: 5.5-8 bar Average consumption: ~15 m3/h Additional consumption: ~24 m3/h Connection (interface): Ø13 mm hose fitting Air exhaust: Quantity: Max. 250 m3/h Connection (interface): PVC Pipe, internal Ø 126 mm Water: Water quality: Clean water pH value: 6.5 to 8.5 Total hardness: 6° to 8° dH Maximum particle size: 100 µm Water temperature at input: Constant 12 – 17 °C *) Maximum water requirement: 350 l/min Average water requirement: approx. 240 – 290 l/min Min/max. pressure: 2 to 5 bar Differential pressure of installation line: At least 2 bar during cutting Maximum cooling power (capacity): 135 kW Supply connection: G 2“(internal thread) Return connection: G 2“(internal thread) Ambient conditions: Ambient temperature: 5°C-25°C Temperature fluctuation: Max. 2 °C per cutting process Max. 1 °C over 1 hour Relative average air humidity: 50 % ± 10 % Structural requirements: Recommended foundation thickness: 200 mm Concrete quality: Strength category C 25/30 Differential setting: Max. 0.8 mm/m Ground evenness: ± 5 mm over 3m Minimal doorway dimension (transport): Height 2900 mm; width 2700 mm Storage and transport of the wire guide rollers: Ambient temperature for transport and storage: > 0°C Relative average air humidity: 50 % ± 10 % Electric power: Mains configuration: TN-S without neutral wire Line voltage / frequency: 3 × 400 V ±10 % / 50 Hz 3 × 480 V ±10 % / 60 Hz Power fuse: 500 A gG-gL fast acting Clamp cross section: Max. 240 mm2 Connection power: 190 kW Max operating power: 165 kW Average operating power: 105 - 135 kW UPS System for PC: Integrated IP Protection class (electrical cabinet, touch-screen): IP 54 Connection network (Ethernet): RJ 45 2011 vintage.