loading

1191 results for found: 익숙한 Crystal Growing, Sawing & Slicing

1 2 3 4 5 6 다음 것
  • ACCRETECH / TSK: S-LM 116G

    ACCRETECH / TSK S-LM 116G Vertical Slicing Machine, high precision 220V, 60Hz, 2.2KvA, 0.5 MPa Max ingot size: 100mm diameter x 350mm long De-installed, can inspect 2000 vintage.
  • AMAT / APPLIED MATERIALS: 500SD-B/5

    APPLIED MATERIALS 500SD-B/5 Wafer saw Cutting Speed Feed rate: 0-9000 µm/minute Max Travel: up to 290 mm Fast Table Speed: 0 - 500 mm/min Wire speed: 0 - 18 m/sec Wire Tension: 0 - 30N Slurry Tank Capacity: 550L Drive motors for web: 2x 61kW Average power consumption: 156 kVA Maximum power consumption: 287 kVA Maximum Working Capacity: 4 x 160mm blocks Maximum Block Size: 160mm W x 160mm H x 500mm Length, without split web for blocks up to 248mm equal length, 8 block capacity 2008 vintage.
  • AMAT / APPLIED MATERIALS: 500SD-B/5

    APPLIED MATERIALS 500SD-B/5 Wafer saw Cutting Speed Feed rate: 0-9000 µm/minute Max Travel: up to 290 mm Fast Table Speed: 0 - 500 mm/min Wire speed: 0 - 18 m/sec Wire Tension: 0 - 30N Slurry Tank Capacity: 550L Drive motors for web: 2x 61kW Average power consumption: 156 kVA Maximum power consumption: 287 kVA Maximum Working Capacity: 4 x 160mm blocks Maximum Block Size: 160mm W x 160mm H x 500mm Length, without split web for blocks up to 248mm equal length, 8 block capacity 2008 vintage.
  • AMAT / APPLIED MATERIALS: HCT

    APPLIED MATERIALS: HCT Ingot squarer Number of runs: 3152 2007 vintage.
  • AMAT / APPLIED MATERIALS: E500SD-B/5

    APPLIED MATERIALS E500SD-B/5 Wire saw Water input: Input pressure: >2.5 bar Input temperature: <9°C Cooling unit power: 150 kW Incoming water flow (without cooling compressor): 18.5 m³/h Machine: Wire speed / Acceleration: 18*/5 m/s / m/s² Wire guides length: 520 mm Wire guides diameter: 300 mm Horizontal working space: 360 mm (4) Wire guides Wire guides drives power: 2x61 kW (2) Tables: Travel (depends on clamping): 290 mm Cutting speed: 0-9000 um/min Fast table speed: 0-500 mm/min Hydraulic passive clamping system Wire: (8) Pulleys Wire tension: 0-30N Wire length: 640 km Wire web width: 500mm Slurry: Tank capacity: 550 lit Pumping capacity: 2x160-200 * (1,6 kg/dm3) kg/min Pump power: 3x7.5 kW Pumping speed adjustment: 0-100% (3) Pumps (6) Manifolds in slicing room Frame & others: Stainless steel Sliding doors Color of frame and panels: RAL 5011 Utilities: Air pressure: 4 to 6 bar Air flow (dry): Min 25 m3/h Air exhaust (pipe ø150 mm): 3x100 m3/h Cooling unit power: 150 kW Incoming water pressure: Min 2.5 bar Incoming water temperature (with cooling compressor): 20 (30 RFNS) °C max 20 Incoming water temperature (without cooling compressor): 9 °C Max Incoming water flow (with cooling compressor): 10.3 m3/h Incoming water flow (without cooling compressor): 18.5 m3/h B5 Base with retrofit hardware Diamond wire technology Machine can run with 120 or 100 µm wire Electrical hooking 50 / 60 Hz: 3x400 / 480 Average power (with cooling compressor): 208 kVA Maximum power (with cooling compressor): 339 kVA Average power (without cooling compressor): 156 kVA Maximum power (without cooling compressor): 287 kVA Grid failure safety option 2011 vintage. HCT HCT E500 E-8 Wire saw
  • AMAT / APPLIED MATERIALS: HCT

    APPLIED MATERIALS HCT Ingot squarer Number of runs: 3152 2007 vintage.
  • AMAT / APPLIED MATERIALS: 500SD-B/5

    APPLIED MATERIALS 500SD-B/5 Wafer saw Cutting Speed Feed rate: 0-9000 µm/minute Max Travel: up to 290 mm Fast Table Speed: 0 - 500 mm/min Wire speed: 0 - 18 m/sec Wire Tension: 0 - 30N Slurry Tank Capacity: 550L Drive motors for web: 2x 61kW Average power consumption: 156 kVA Maximum power consumption: 287 kVA Maximum Working Capacity: 4 x 160mm blocks Maximum Block Size: 160mm W x 160mm H x 500mm Length, without split web for blocks up to 248mm equal length, 8 block capacity 2008 vintage.
  • AMAT / APPLIED MATERIALS: 500SD-B/5

    APPLIED MATERIALS 500SD-B/5 Wafer saw Cutting Speed Feed rate: 0-9000 µm/minute Max Travel: up to 290 mm Fast Table Speed: 0 - 500 mm/min Wire speed: 0 - 18 m/sec Wire Tension: 0 - 30N Slurry Tank Capacity: 550L Drive motors for web: 2x 61kW Average power consumption: 156 kVA Maximum power consumption: 287 kVA Maximum Working Capacity: 4 x 160mm blocks Maximum Block Size: 160mm W x 160mm H x 500mm Length, without split web for blocks up to 248mm equal length, 8 block capacity 2008 vintage.
  • AMAT / APPLIED MATERIALS: 500SD-B/5

    APPLIED MATERIALS 500SD-B/5 Wafer saw Average power consumption: 156 kVA Maximum power consumption: 287 kVA 2008 vintage.
  • AMAT / APPLIED MATERIALS: 500SD-B/5

    APPLIED MATERIALS 500SD-B/5 Wafer saw Cutting Speed Feed rate: 0-9000 µm/minute Max Travel: up to 290 mm Fast Table Speed: 0 - 500 mm/min Wire speed: 0 - 18 m/sec Wire Tension: 0 - 30N Slurry Tank Capacity: 550L Drive motors for web: 2x 61kW Average power consumption: 156 kVA Maximum power consumption: 287 kVA Maximum Working Capacity: 4 x 160mm blocks Maximum Block Size: 160mm W x 160mm H x 500mm Length, without split web for blocks up to 248mm equal length, 8 block capacity 2008 vintage.
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    APPLIED MATERIALS / HCT E500SD-B/5 Wire saws.
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    APPLIED MATERIALS / HCT E500SD-B/5 Wire saws Slices mono-crystalline silicon ingots and poly-crystalline silicon bricks Designed to slice photovoltaic cells Thin and ultra thin wafers (100 µm to 240 µm) Wafer size / Ingots per setup / Ingot length 125 mm x 125 mm / 4 / 500 mm 156 mm x 156 mm / 4 / 500 mm 210 mm x 210 mm / 2 / 500 mm Slurry recycling unit: Throughput 30 MW / system / yr Used slurry components: SiC Coolant (HS, oil, PEG.) Kerf (Si, fine SiC, Fe,.) Double stage recovery: Solid / Solid (SiC / Kerf) Solid / Liquid (Coolant / Kerf ) Accessories and spare parts: Loading and unloading devices Manual orientation systems (MOS) Gluing stations Optical alignment tools Specialized loading and unloading equipment Slurry Cutting wire.
  • AMAT / APPLIED MATERIALS / HCT: 500SD-B/5

    APPLIED MATERIALS / HCT 500SD-B/5 Wire saws 2008-2009 vintage.
  • AMAT / APPLIED MATERIALS / HCT: 500SD-B/5

    APPLIED MATERIALS / HCT 500SD-B/5 Wire saws 2008-2009 vintage.
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    APPLIED MATERIALS / HCT E500SD-B/5 Wire saws Slices mono-crystalline silicon ingots and poly-crystalline silicon bricks Designed to slice photovoltaic cells Thin and ultra thin wafers (100 µm to 240 µm) Wafer size / Ingots per setup / Ingot length 125 mm x 125 mm / 4 / 500 mm 156 mm x 156 mm / 4 / 500 mm 210 mm x 210 mm / 2 / 500 mm Slurry recycling unit: Throughput 30 MW / system / yr Used slurry components: SiC Coolant (HS, oil, PEG.) Kerf (Si, fine SiC, Fe,.) Double stage recovery: Solid / Solid (SiC / Kerf) Solid / Liquid (Coolant / Kerf ) Accessories and spare parts: Loading and unloading devices Manual orientation systems (MOS) Gluing stations Optical alignment tools Specialized loading and unloading equipment Slurry Cutting wire.
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    APPLIED MATERIALS / HCT E500SD-B/5 Wire saws Slices mono-crystalline silicon ingots and poly-crystalline silicon bricks Designed to slice photovoltaic cells Thin and ultra thin wafers (100 µm to 240 µm) Wafer size / Ingots per setup / Ingot length 125 mm x 125 mm / 4 / 500 mm 156 mm x 156 mm / 4 / 500 mm 210 mm x 210 mm / 2 / 500 mm Slurry recycling unit: Throughput 30 MW / system / yr Used slurry components: SiC Coolant (HS, oil, PEG.) Kerf (Si, fine SiC, Fe,.) Double stage recovery: Solid / Solid (SiC / Kerf) Solid / Liquid (Coolant / Kerf ) Accessories and spare parts: Loading and unloading devices Manual orientation systems (MOS) Gluing stations Optical alignment tools Specialized loading and unloading equipment Slurry Cutting wire.
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    APPLIED MATERIALS / HCT E500SD-B/5 Wire saws Slices mono-crystalline silicon ingots and poly-crystalline silicon bricks Designed to slice photovoltaic cells Thin and ultra thin wafers (100 µm to 240 µm) Wafer size / Ingots per setup / Ingot length 125 mm x 125 mm / 4 / 500 mm 156 mm x 156 mm / 4 / 500 mm 210 mm x 210 mm / 2 / 500 mm Slurry recycling unit: Throughput 30 MW / system / yr Used slurry components: SiC Coolant (HS, oil, PEG.) Kerf (Si, fine SiC, Fe,.) Double stage recovery: Solid / Solid (SiC / Kerf) Solid / Liquid (Coolant / Kerf ) Accessories and spare parts: Loading and unloading devices Manual orientation systems (MOS) Gluing stations Optical alignment tools Specialized loading and unloading equipment Slurry Cutting wire.
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    APPLIED MATERIALS / HCT E500SD-B/5 Wire saws.
  • AMAT / APPLIED MATERIALS / HCT: B5

    APPLIED MATERIALS / HCT B5 Wire saw.
  • AMAT / APPLIED MATERIALS / HCT: B5

    APPLIED MATERIALS / HCT B5 Wire saw.
보여 주다 페이지 당
1 2 3 4 5 6 다음 것