판매용 중고 MEYER BURGER 268 #9195920

Wire saw Air maintenance unit (media module) Traversing device (wire tensioning system) Electric cabinet (control system) Wire spool (wire tensioning system) Winder (wire tensioning system) Wire guide rollers WGR Slurry nozzles (slurry supply line) Operating panel (control system) Movable bearings Slurry tank (slurry unit) Workpiece Cross-section maximum: 210 mm x 210 rrm (0 220 mm) Length maximum: 960mm (sptl web) Number of workplaces: 4 x 240 mm Wafer thickness: 0.100 mm Cutting feed Speed: 0.01 - 10 mm/min Rapid traverse: 200 mm/min Working stroke: Maximum 265 mm Wire: Wire speed: Programmable up to 20 m/s Wire diameter: 0.100 - 0.160 mm Wire length (applies to TA 100): Upto 640 km for wire with 0 0.160 mm Up to 800 km for wire with 0 0.140 mm Up to 1100 km for wire with 0 0.120 mm Wire direction: Forward or reverse cutting Acceleration: Up to 2 m/s² Cycle time: Programmable (in forward and backward movement) Pre-tension: Up to 35 N (depends on wire Ø) Wire guide rollers: Roller diameter: 350 mm Roller length: 1161 mm (2) Wire guide rollers Required power: 2 x 75 kW Special roller bearings Water-cooled Horizontal distance between axes: 660 mm Wire web: Working height: 1,515 mm Wire web width: 960 mm, 1,130 mm Wire deflection rollers: Diameter: 160 mm Number: 3 on each side (2 narrow, 1 wide) plus 3 for split web on each side (narrow) Wire winder: Spool axis working height: 1,160 mm MC spool: MB500 Wire length on MC spool: 800 km Supplier spool: TA 100 and TA 180 Slurry supply: Tank maximum capacity: 390 I Recommended filling quantity of slurry: 300 - 320 I (observe clipping!) Slurry temperature constant at ± 1 °C: 20-27°C (For a cooling water inlet temperature of 12-17°C) Pump delivery rate maximum: 12,000 kg/h Slurry density: 1.62 kg/ dm³ PEG300/F600 25 °C Adjustable Measured and displayed by mass flow meters Control system: SPS control S7 with integrated PC SIEMENS 10.4" flat panel with touchscreen Electrical connection and utility: Maximum connection capacity: 210 kW Maximum operating power: 165 kW Mains conditions: EN60204 Part 1 TN-S Transformer connection: Dy Ø UPS system for PC Integrated Minimum compressed air quality in accordance Maximum particle diameter (class 4): 15 pm Maximum particle density (class 4): 8 mg/m³ Maximum residual oil content (class 4): 5 mg/m³Maximum residual water content 6 g/m³ Pressure condensation point: +3 °C Inlet pressure: 5.5-8 bar Average consumption: Approx. 20 m³/h Maximum consumption (short-term): 20 m³/h Inside hose diameter 13 mm Additional consumption with Slurry management membrane pump: Approx. 24 m³/h.